Conical mixer is high-performance vertical mixer for powder, granules, liquid additives,etc. like for moistening, agglomerating, and granulating materiasl, which is widely used in chemical,dyestuff, battery and rare earth line industries etc.
Conical mixer features a mixing drum with inlets, vent, and outlets! It includes mixing screws, transmission units, seal units.
Materials are lifted up by several screws with self-rotation as well as running with arm rotation so as to ensure reliable performance of mixing quality.where requried, spray lines, side clean doors, high-speed choppers,heat or cold jacket，different functional coating can be installed to achieve the desired mixing effect.

DLH vertical mixer is suitable for powder material with high healthy requirement. The conical tank make sure completely discharge and no leftover. The top driven unit and special sealing structure prevent the potential leakage caused by wear of the driven unit sealing. The mixer is able to bear pressure and vacuum during operation.

Ribbon mixer is horizontal batch mixers which feature two mixing blades of inner ribbons and outer ribbons! The blades move the materials in opposing directions, ensuring excellent cross-mixing of materials. This ribbon mixer is characterized by high mixing effect, large productivity, and a very low failure rate.
Ribbon mixer is widely powder, granules, liquid additives, slurry etc. like for moistening, agglomerating, and granulating materiasls, which is widely used in food,medicine,feed,chemical,fertilizer, new energy industries etc.
where requried, spray lines, side clean doors, high-speed choppers,heat or cold jacket，different functional coating can be installed to achieve the desired mixing effect

Plough mixer is high-performance mixer for powder, granules, liquid additives, short fibres,etc. like for moistening, agglomerating, and granulating materiasl, which is widely used in food,feed,chemical,dry mortar,plastic industries etc.
Ploug mixer features a mixing drum with inlets, vent, and outlets! It includes mixing agitator, transmission units, seal units,end plates.
Several ploughs equipped with high speed choppers ensure reliable performance of mixing quality.where requried, spray lines, side clean doors, high-speed choppers,heat or cold jacket，different functional coating can be installed to achieve the desired mixing effect.

Double shafts paddle mixer is high-performance mixer for powder, granules, liquid additives, short fibres, etc. like for mixing  moistening, agglomerating, and granulating material, which is widely used in food, feed, chemical, dry mortar industries etc.
With the most powerful motor and double shaft paddle structure, material can be mixed evenly in the shortest time. It is particularly good at mixing material with big difference in gravity, mesh size, fluidity. Four or two hatches on the side of the machine (depending on the size of the mixer) ensure easy and hygienic cleaning of the system.
where requried, spray lines, side clean doors, high-speed choppers, heat or cold jacket，different functional coating can be installed to achieve the desired mixing effect.

Paddle mixer is a single shaft mixer with paddle mixing blades. The blades move the materials in opposing directions, ensuring excellent cross-mixing of materials.
Paddle mixer is widely powder, granules, liquid additives, slurry, paste etc. like for mixing, moistening, agglomerating, and granulating materiasl, which is widely used in food, construction,feed,chemical,fertilizer, new energy industries etc.
where requried, spray lines, side clean doors, high-speed choppers,heat or cold jacket，different functional coating can be installed to achieve the desired mixing effect.

CM-series continuous mixer has single shaft and double shafts choice, it consists of a mixing vessel with an inlet at one end of the mixing drum, an outlet at the opposite end and a venting spout, one or two mixing shaft, transmission unit, and seal unit.
Plough or inclined paddle rotate as mixing tools, push the material constantly from feeding side to the outlet side, the quality of the mixture is achieved before the product reaches the mixer outlet. because of its non-stop process, it can match the large scale production line, Continuous Mixers are widely used for dry bulk solids (powders, granules), dry bulk solids + liquids (moistening + granulating), sludge or low-viscosity pastes.
In some cases, to obtain the desired mixing effect, separately driven high-speed choppers in the drum or baffle plate before the outlet can be installed.

This is a rotary drum mixer that relies on the active rolling of the cylinder to mix materials. There is no stirring shaft inside, making it suitable for the mixing of fragile materials. It features no forced friction, no residue in the cylinder after discharge, and the ability to operate on a large scale. Inside the cylinder, there are forward and reverse helical ribbons. When the cylinder rotates, they form multi-directional convection circulation, efficiently mixing the materials. Due to its low magnetic foreign matter content and good liquid-phase coating, it is particularly applied in the new energy lithium battery materials and chemical industries.